View UPA1820_259371.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS FIELD EFFECT TRANSISTOR
PA1820
N-CHANNEL MOS FIELD EFFECT TRANSISTOR FOR SWITCHING
DESCRIPTION
The PA1820 is a switching device which can be driven directly by a 2.5 V power source. This device features a low on-state resistance and excellent switching characteristics, and is suitable for applications such as DC/DC Converters and power management of notebook computers and so on.
8
PACKAGE DRAWING (Unit: mm)
5 1 : Drain1 1,2,3 :Source 2, 3 : Source1 4 :Gate 4 : Gate1 5 : Gate2 5,6,7,8 :Drain 6, 7 : Source2 8 : Drain2
1.2 MAX. 1.00.05 0.25 3 +5 -3 0.10.05 0.5 0.6 +0.15 -0.1
FEATURES
* 2.5 V drive available * Low on-state resistance RDS(on)1 = 8.6 m MAX. (VGS = 4.5 V, ID = 6.0 A) RDS(on)2 = 8.8 m MAX. (VGS = 4.0 V, ID = 6.0 A) RDS(on)3 = 12 m MAX. (VGS = 2.5 V, ID = 6.0 A) * Built-in G-S protection diode against ESD
1 4
0.145 0.055
3.15 0.15 3.0 0.1
6.4 0.2 4.4 0.1 1.0 0.2
ORDERING INFORMATION
PART NUMBER PACKAGE Power TSSOP8
0.65 0.27
+0.03 -0.08
PA1820GR-9JG
0.8 MAX. 0.10 M
0.1
ABSOLUTE MAXIMUM RATINGS (TA = 25C)
Drain to Source Voltage (VGS = 0 V) Gate to Source Voltage (VDS = 0 V) Drain Current (DC) Drain Current (pulse)
Note1 Note2
VDSS VGSS ID(DC) ID(pulse) PT Tch Tstg
20 12 12 48 2.0 150 -55 to +150
V V A A W C C
EQUIVALENT CIRCUIT
Drain
Total Power Dissipation Channel Temperature Storage Temperature
Gate Gate Protection Diode
Body Diode
Source
Notes 1. PW 10 s, Duty Cycle 1% 2 2. Mounted on ceramic substrate of 5000 mm x 1.1 mm Remark The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. G16274EJ1V0DS00 (1st edition) Date Published October 2002 NS CP(K) Printed in Japan
(c)
2002
PA1820
ELECTRICAL CHARACTERISTICS (TA = 25C)
CHARACTERISTICS Zero Gate Voltage Drain Current Gate Leakage Current Gate Cut-off Voltage Forward Transfer Admittance Drain to Source On-state Resistance SYMBOL IDSS IGSS VGS(off) | yfs | RDS(on)1 RDS(on)2 RDS(on)3 Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Total Gate Charge Gate to Source Charge Gate to Drain Charge Body Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD VF(S-D) trr Qrr VDD = 16 V VGS = 4.0 V ID = 12 A IF = 12 A, VGS = 0 V IF = 12 A, VGS = 0 V di/dt = 100 A / s TEST CONDITIONS VDS = 20 V, VGS = 0 V VGS = 12 V, VDS = 0 V VDS = 10 V, ID = 1.0 mA VDS = 10 V, ID = 6.0 A VGS = 4.5 V, ID = 6.0 A VGS = 4.0 V, ID = 6.0 A VGS = 2.5 V, ID = 6.0 A VDS = 10 V VGS = 0 V f = 1.0 MHz VDD = 10 V, ID = 6.0 A VGS = 4.0 V RG = 10 0.5 11 1.0 21.5 6.8 7.0 8.7 2020 600 430 18 56 75 52 27 2.6 13 0.81 61 40 8.6 8.8 12 MIN. TYP. MAX. 1.0 10 1.5 UNIT
A A
V S m m m pF pF pF ns ns ns ns nC nC nC V ns nC
TEST CIRCUIT 1 SWITCHING TIME
TEST CIRCUIT 2 GATE CHARGE
D.U.T. RL PG. RG VDD ID VGS 0 = 1 s Duty Cycle 1% ID
Wave Form
VGS VGS
Wave Form
0
10%
VGS
90%
D.U.T. IG = 2 mA 50 RL VDD
90% 90%
PG.
ID
0 10% 10%
td(on) ton
tr td(off)
toff
tf
2
Data Sheet G16274EJ1V0DS
PA1820
TYPICAL CHARACTERISTICS (TA = 25C)
DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA
120
TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE
2.5
dT - Percentage of Rated Power - %
100
PT - Total Power Dissipation - W
2
Mounted on Ceramic Substrate of 2 5000 mm x 1.1 mm
80
1.5
60
1
40
20
0.5
Mounted on FR-4 board 2 of 2500 mm x 1.6 mm
0 0 25 50 75 100 125 150 175
0 0 25 50 75 100 125 150 175
TA - Ambient Temperature - C
TA - Ambient Temperature - C
FORWARD BIAS SAFE OPERATING AREA
100 ID(DC)
ID - Drain Current - A
ID(pulse)
10
PW = 1 ms
1 RDS(on) Limited (VGS = 4.5 V) 0.1
Single pulse Mounted on Ceramic Substrate 2 of 5000 mm x 1.1 mm
10 ms 100 ms DC
0.01
0.1
1
10
100
VDS - Drain to Source Voltage - V
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH
1000
rth(ch-A) - Transient Thermal Resistance - C/W
Single pulse
Mounted on FR-4 board Mounted on FR-4 board 2 of 2500 mm2 x 1.6 mm of 2500 mm x 1.6 mm 125C/W 125C/W
100
10
Mounted on Ceramic 2 Substrate of 5000 mm x 1.1 mm 62.5C/W
1
1m 10 m 100 m 1 10 100 1000
PW - Pulse Width - s
Data Sheet G16274EJ1V0DS
3
PA1820
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE
80 70 VGS = 4.5 V 4.0 V
FORWARD TRANSFER CHARACTERISTICS
1 00 10 V D S = 10 V P u lsed T A = 12 5 C 7 5C 2 5C - 2 5C
ID - Drain Current - A
ID - Drain Current - A
60 50 40 30 20 10
2.5 V 1 0 .1 0 .01 0 .00 1 Pulsed 0 .00 01 0 0.5 1 1.5 2 2.5 0 0 .5 1 1 .5
0
2
2 .5
VDS - Drain to Source Voltage - V
VGS - Gate to Source Voltage - V
GATE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE
1.2 VDS = 10 V ID = 1.0 m A 1.0
FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT | yfs | - Forward Transfer Admittance - S
100 TA = -25C 25C 75C 125C
VGS(off) - Gate Cut-off Voltage - V
10
0.8
1
0.6
0.4 -50 0 50 100 150
0.1 0.01
VDS = 10 V Pulsed 0.1 1 10 100
Tch - Channel Temperature - C
ID - Drain Current - A
DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE RDS(on) - Drain to Source On-state Resistance - m RDS(on) - Drain to Source On-state Resistance - m
20 ID = 6.0 A Pulsed 15 VGS = 2.5 V 4.0 V 10
DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE
20 ID = 6.0 A Pulsed 15
10
5
4.5 V
5
0 -50 0 50 100 150
0 0 2 4 6 8 10
Tch - Channel Temperature - C
VGS - Gate to Source Voltage - V
4
Data Sheet G16274EJ1V0DS
PA1820
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT RDS(on) - Drain to Source On-state Resistance - m
20 ID = 6.0 A Pulsed 15 VGS = 2.5 V 4.0 V 10000
CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE
VGS = 0 V f= 1.0 M H z
C iss, C oss, C rss - Capacitance - pF
C iss 1000
10
C oss C rss
5 4.5 V 0 0.01
100 0.1 1 10 100 0.1 1 10 100
ID - Drain Current - A
VDS - Drain to Source Voltage - V
SWITCHING CHARACTERISTICS
1000 100 VDD = 10 V VGS = 4.0 V RG = 10
SOURCE TO DRAIN DIODE FORWARD VOLTAGE
VGS = 0 V Pulsed
td(on), tr, td(off), tf - Switching Time - ns
IF - Diode Forward Current - A
10
100
td(off) tr tf
1
0.1
td(on) 10 0.1 1 10 100
0.01 0.4
0.6
0.8
1.0
1.2
ID - Drain Current - A
VF(S-D) - Source to Drain Voltage - V
DYNAMIC INPUT/OUTPUT CHARACTERISTICS
5 ID = 12 A
VGS - Gate to Source Voltage - V
4 VDD = 4.0 V 10 V 16 V
3
2
1
0 0 5 10 15 20 25 30 35
QG - Gate Charge - nC
Data Sheet G16274EJ1V0DS
5
PA1820
* The information in this document is current as of October, 2002. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4

▲Up To Search▲

Price & Availability of UPA1820

	To Download UPA1820 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .